Product Description

Description: For face protection,high quality and best service
 welding helmet with ST filter
Good Quality Professioanl Safety Protective Electric Welding Helmet/Mask 
Welding helmet weight:  510g
Filter Size:  110×90×9mm  
Viewing Area:  90×40mm 
Packing:Quantity Per Carto  4pcs per carton or as your request 
Carton Size(CM):L*W*H:  49X49X35
Weight Of A Carton(kgs):  G.W.:18KG      N.W.:aroud 5KG
 

How to put on the safety belt:
1.Take the harness out from the packing, holding it by the dorsal tightening ring.
2.Wear the harness by slipping on the shoulder straps one after one, taking care not twist them.Adjust them by pulling or releasing the slack end, so that the buttock strap is firmly in place under the buttocks.Pull one and the other thigh strap through the crotch and latch each strap.Make sure not to cross the straps.
3.Attach the chest strap and adjust its tension to hold the shoulder straps centered on each shoulder.Check that the belts would not be wrapped up themselves.
4.Adjust the harness by pulling and releasing the free end of the belt, so that the belts would be well tight and at the same time would not prevent free movements.
5.The adjustment should be effected by checking that the dorsal ring would be positioned between the shoulder blades or frontal tightening connector would be positioned at the height of the breastbone and that the sitting belt would be correctly positioned.
6.For the frontal tightening, the connector of the two back eyes should be in compliance with the norm en362, always connected to both eyes and locked.It is always recommended its use, even if you are using the dorsal tightening ring.


We can customize the products to your needs.
And any color is available.
We are proffesional manufacturer and trader of safety shoes, work gloves and other safety items. Our company was founded in 2007. We have full experices of exporting services. Our customers are from all over the world, including north Africa, South Africa, Middle East and Europe.